Cold Peel Transfers Instructions

DTF Transfer Pressing Instructions

Heat Press Required: Commercial heat press or quality clam-shell heat press.

  • Temperature: 300–325°F

  • Press Time: 10–15 seconds

  • Pressure: Medium to firm

  • Pre-Press garment to remove any moisture.

  • Cold peel — allow transfer to cool completely before peeling.

  • Second Press- Cover the design and repress for an additional 5-8 seconds.

Aftercare Instructions

  • Wait 24 hours before washing.

  • Turn garment inside out before washing.

  • Wash with cold water.

  • Air dry or tumble dry on low heat.

  • Do not use bleach directly on the design.

  • Avoid ironing directly over the transfer.

Important: Pressing results can vary depending on the garment, heat press, pressure, and fabric. Always test a transfer when using a new garment or material.

Perfect for

DTF transfers can be applied to many fabric types, including cotton, polyester, cotton/poly blends, and other compatible fabrics. Always check your garment manufacturer's heat recommendations before pressing.

Please note:

NOTE: Colors and sizes may vary compared to this image mockup. Slight color change may occur after pressing. We do not accept returns or exchanges. We are not responsible for user error.  These instructions are provided based on the transfer manufacturer's recommended application guidelines.

Important Notes

  • Transfers require heavy/maximum pressure for proper application.
  • Home irons and Cricut EasyPress machines are not recommended.
  • For best results, use a heat press with even heat and pressure.
  • Insufficient heat or pressure may result in an incomplete or poor-quality transfer.
  • Always test on your specific garment/fabric before applying to bulk orders.